Skip to product information
OrigArmor Prime
NEWOrigArmor Prime AR Anti-Scratch Screen Protector for iPhone 18 Pro. AR clarity, with a coating hard enough to keep it.
Why This Glass
Ultra-hard surface
≥16 GPa nano-hardness
LiDAR coating process
Coating process adapted from LiDAR optics
True AR, <0.8% reflection
>94.5% light transmission — a true anti-reflective coating, never matte
$59.99
1 protector · alignment tray included
First Production Run
100 units / One per customer / Next run OCT 23
Tested & Certified
SGS · Scratch resistance test
What we tested
A finished OrigArmor Prime, straight from its packaging, with the shipping liner peeled off — the same protector you would put on your phone.
How
A linear abrasion tester drew 120-grit quartz sandpaper across the coated surface under a 3 kg load, through a 10 × 10 mm head, at 13 mm/s over a 30 mm stroke — one pass. Lab conditions 23±2 °C, 50±5% RH.
Result
No scratch. Pass.
Why it matters
An AR coating rarely fails by cracking. It fails by hazing over — and once the surface is covered in fine scratches, the anti-reflective layer stops doing its job. Hardness is what keeps the clarity you paid for.
SGS · REPORT NO. GZMR260903293301 · ISSUED SEP 10, 2026
TEST METHOD SUPPLIED BY TORRAS
TÜV Rheinland · Anti-reflection test
What it certifies
The optical half of the coating: how much light the protector lets through to you, and how much it throws back as glare.
Measured on the finished protector
More than 94.5% visible-light transmittance, and under 0.8% reflection — verified on the assembled product, not on a bare glass sample.
Why it matters
A protector sits between you and every pixel. These two numbers are the difference between a screen that still looks like your screen, and one that looks like it is behind glass.
REPORT NO. CN26LGAZ 001 · ISSUED SEP 10, 2026
Testing laboratory TÜV Rheinland Co., Ltd.
Complete your kit
- An anti-reflective screen protector for iPhone 18 Pro that stays clear. Ordinary anti-glare AR glass looks perfect on day one, but the same clarity makes fine scratches easy to see within weeks. OrigArmor Prime is a scratch-resistant tempered glass screen protector with nano-hardness of ≥16 GPa (a typical AR coating sits around 11 GPa), so dust grit, keys and everyday contact are far less likely to leave a mark.
- Anti-glare without the haze: a 13-layer zoned anti-reflective coating separates optical tuning from surface hardening, so the extra hardness costs nothing in clarity — over 94.5% light transmission and under 0.8% reflectance with Tora-Coating™. Brightness, color and detail stay close to the bare screen, and the display stays readable in direct sunlight and backlight, so framing shots and checking color outdoors is easier.
- Face ID compatible: a wide-band AR layer stays highly transparent at 920–960 nm near-infrared, so Face ID on your iPhone 18 Pro unlocks just as it does on the bare screen.
- Full coverage with an original-screen feel: the Tora-Bend™ integrated 3D process with rounded 3D edges covers over 98% of the display on 0.4mm high-aluminosilicate tempered glass and 0.38mm anti-rainbow adhesive. A Shin-Etsu licensed oleophobic coating (initial water contact angle ≥115°) makes it smooth and fingerprint resistant — smudges wipe off in one pass.
- One screen protector that lasts: reliability validated through abrasion, UV aging, salt-spray and temperature-humidity cycling tests, so you are not replacing your screen protector every time it picks up a scratch. Installation tray and cleaning kit included for a guided, dust-free fit.
1 × OrigArmor Prime protector
Scratch-resistant AR glass with 3D rounded edges.
Installation tray
Aligns the glass for a clean, guided fit.
Cleaning kit
Wet wipe, microfiber cloth, dust removal sticker.
The details
Full specifications.
- Nano-hardness
- ≥16 GPa · conventional AR coatings ≈11 GPa
- Reflectance
- <0.8% visible light · Tora-Coating™ anti-reflective
- Light transmission
- >94.5% visible light
- Coating structure
- 13-layer zoned system · optics and hardness in separate layers
- Face ID
- Wide-band AR · high transmission at 920–960 nm
- Glass
- 0.4mm high-aluminosilicate glass
- Adhesive
- 0.38mm anti-rainbow adhesive
- Coverage
- >98% · Tora-Bend™ integrated 3D process · 3D rounded edges
- Oleophobic coating
- Shin-Etsu licensed AF · initial water contact angle ≥115°
- Reliability testing
- Abrasion · UV aging · salt spray · temperature-humidity cycling
- In the box
- 1 protector · installation tray · cleaning kit
- Support
- 365-day warranty · 30-day free returns · reply within 24h
- Compatibility
- iPhone 18 Pro